Sorry your browser is not supported!

You are using an outdated browser that does not support modern web technologies, in order to use this site please update to a new browser.

Browsers supported include Chrome, FireFox, Safari, Opera, Internet Explorer 10+ or Microsoft Edge.

DarkBASIC Professional Discussion / [SOLVED] dbprocore.dll

Author
Message
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 14:53
Is only version 7.7 required?

Http://files.thegamecreators.com/darkbasicprofessional/upgrade/dbpro_upgrade_7_7_RC7.zip

Or is this an UPGRADE to overlay it to an earlier version of DB Pro?
DB Pro

The author of this post has marked a post as an answer.

Go to answer

eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 14:53 Edited at: 3rd Jun 2019 17:31
This post has been marked by the post author as the answer.
The DBPro installation does not work for me,
I have to look for another installation, but I can not find the 64-bit version of the DBpro.
I had to carry
to fix my PC, the two hard discors had been fused, the repairman changed the 32 bits system for the 64 bits since,
my CPU supports the two systems. It may be that the problem is that the files that
I install it for 32 bits, since before now my PC worked in 32 bits.
But I can not find the DBPro Installation packages here anymore.
If someone can guide me, please tell me how to do, I have no idea what to do. Thanks
Emilio Aníbal
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 14:54 Edited at: 22nd May 2017 22:15
...
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 14:54 Edited at: 22nd May 2017 22:16
...
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 14:55 Edited at: 22nd May 2017 22:16
...
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 15:01 Edited at: 22nd May 2017 22:17
...
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 15:50 Edited at: 22nd May 2017 22:18
I understand that you have to do something like the following:

1.

    A. Install DB Pro


         Dark Basic Professional-1.0 (CD)

    B. Place the Synergy Editor (Path) file in ...

       Path C: \ Program Files \
         The Game Creators \ Dark Basic Professional \ Editor





2.
       
         Overlap DBPro (binary example 12022016) in ...

       Path
C: \ Program Files \ The Game Creators \
         Dark Basic Professional



3.

         Load UPGRADE 7.7 into ...

         Path
C: \ Program Files \ The Game Creators \
         Dark Basic Professional \

4.
         Execute UPGRADE 7,7
DB Pro

Attachments

Login to view attachments
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 12th May 2017 16:30 Edited at: 12th May 2017 16:46
To see that it does not locate the Compiler,
I have replaced two Syergy Editor files with the correct Path
and I have also placed the Synergy Editor in the folder Dark Basic Professional,
if required, but it gives the same error of not locating the Compiler

This error occurs with EditorNew
The other two Editors (Launch and Editor) do not work, they give other errors.

DB Pro

Attachments

Login to view attachments
Unseen Ghost
21
Years of Service
User Offline
Joined: 2nd Sep 2002
Location: Ohio
Posted: 12th May 2017 20:13 Edited at: 13th May 2017 04:33
The first thing you need to do is get DarkBasic Pro running before you start adding things.

Copy and paste all your projects somewhere on your computer where you know where they are for later.

Then uninstall everything you have and delete left behind folder if any. Then follow my directions I posted above exactly.
Follow the descriptions and pictures below for the rest.

[img][/img]


As the picture shows, browse into the DarkBasic Pro options in the Environment tab.

[img][/img]

Then navigate to the DarkBasic Pro compiler folder as this picture shows and select the DBPCompiler.exe file and then click Open. You should be up and running then. Close DarkBasic Pro and copy and paste your projects back into the projects folder.
Gigabyte Board/2.93Ghtz Intel Core Duo Proc./4GB Ram/Nvidia Geforce 9400 GT(PNY)1GB Video/500GB Western Dig. HD/Dark Basic Pro 7.4

No one cares how much you know until they know how much you care.
John Y
Synergy Editor Developer
21
Years of Service
User Offline
Joined: 4th Sep 2002
Location: UK
Posted: 13th May 2017 10:27
Make sure you use this download of Synergy Editor.

https://forum.thegamecreators.com/thread/209135

You don't need Synergy Editor to be in the same directory as DBPro. For best results your DBPro installation should not be under Program Files, as Windows treats this folder differently. It would probably be a good idea to install DBPro under My Documents. Then you won't have any issues with permissions.
Synergy Editor - Available for free HERE!
CumQuaT
AGK Master
13
Years of Service
User Offline
Joined: 28th Apr 2010
Location: Tasmania, Australia
Posted: 14th May 2017 11:43
I'll still be sending you my install, eamav. Sorry it was delayed. Had a bit of a family emergency come up.
I work full-time making games in AGK2 and DBpro. Living the dream!
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 14th May 2017 23:22 Edited at: 19th Jul 2017 01:11
Thanks CumQuaT, I wait for your shipment and do not worry about taking a little longer,
what matters in the end is to be able to continue programming in Dark Basic Professional,
if with your assembly of files I get it, I will be eternally grateful.


19 July 2017

Thanks CumQuaT, I hope your submission and do not worry about taking a little more time,
what matters is to continue programming in Dark Basic Professional.
If I can with your set of files, I will be eternally grateful.

I still did not receive your private message, or was it lost?

First of all yours and when you can, you help me
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 14th May 2017 23:39
I have tried installing DB Pro in the My Documents folder, following the steps
Of the friend Unseen Ghost, except for eliminating the above (which is that ...).
because if I do that there would be nothing left to continue the test,
it may be that the translation with Google is not good, but that explanation I can not understand.
Anyway I get no compiler location error.
I
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 14th May 2017 23:41 Edited at: 19th Jul 2017 01:19
Thanks also to friends John Y and CumQuaT and Unseen
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 14th May 2017 23:48 Edited at: 14th May 2017 23:53
I read the "Readme" version of Dark-Basic-Pro-12.02.16,
which says that to work requires Visual Studio 2012 (that is,
Visual Studio version 8) and also Direct X SDK 2007,
I proceeded to install both .

I have also done cleaning on my PC,
eliminating programs that could interfere,
like SKYPE, NVIDIA..3D and several other programs.

But the problem persists.
DB Pro
CumQuaT
AGK Master
13
Years of Service
User Offline
Joined: 28th Apr 2010
Location: Tasmania, Australia
Posted: 15th May 2017 08:28
Sending you a private message, eamav!
I work full-time making games in AGK2 and DBpro. Living the dream!
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 15th May 2017 23:08 Edited at: 15th May 2017 23:11
I receive your message


thanks my friend
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 16th May 2017 02:01 Edited at: 16th May 2017 02:17
Test with DBPro.zip - EAMAV

Placed DBPro.zip-EAMAV in C: Program Files \ The Game Creators \ Dark Basic Professional

Fixed with real path in Synergy Editor.cfg and Synergy Editor.EXE

Path of the Compiler in New Editor Option and deleted part:

; Last Project opened / saved
LastProject = D: \ Malevolence - Complete \ Malevolence.dbpro


RESULT:

Launcher
    ERROR editor (collapsed when opening .dba file)

Editor
    ERROR editor (collapsed when opening .dba file)

EXE Editor
    ERROR editor (collapsed when opening .dba file)


New Editor
    ERROR when compiling (does not locate the Compiler)

DB Pro

Attachments

Login to view attachments
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 16th May 2017 03:06 Edited at: 16th May 2017 03:16
Test with DBPro.zip - EAMAV DX11

Placed DBPro.zip-EAMAV in C: Program Files \ The Game Creators \ Dark Basic Professional

Fixed with real path in Synergy Editor.cfg and Synergy Editor.EXE

Path of the Compiler in New Editor Option and deleted part:

; Last Project opened / saved
LastProject = D: \ Malevolence - Complete \ Malevolence.dbpro


RESULT:

Launcher
ERROR editor (collapsed when opening .dba file)

Editor
ERROR editor (collapsed when opening .dba file)

EXE Editor
ERROR editor (collapsed when opening .dba file)


New Editor
ERROR create Application.exe (???)
Run Aplication.exe, do not open the program or maybe open it and close it ...) ???
DB Pro

Attachments

Login to view attachments
CumQuaT
AGK Master
13
Years of Service
User Offline
Joined: 28th Apr 2010
Location: Tasmania, Australia
Posted: 16th May 2017 12:38
Interesting. That error usually only shows when you have more than one instance of DBpro open at the same time.
I work full-time making games in AGK2 and DBpro. Living the dream!
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 17th May 2017 19:22 Edited at: 17th May 2017 20:06
The two installations I did only with each of the versions,
that you sent me separately and I deleted the first one to install the second version,
there I left images of the files and folders installed in the second version,
in no case I installed before another version, neither DB Pro 1.0 (CD)

I just changed the path in Synergy Editor and in Option

The second install will get you to create the executable, With Editor New,
but it will not work.
And I have executables of the previous version, that if they work ...

Other Editors give error for lack of Main.htm

Contents related to Main.htm in Synergy Editor

; The help file that is used if a command is not highlighted
MainHelpURL=main.htm

DB Pro

Attachments

Login to view attachments
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 18th May 2017 02:56 Edited at: 18th May 2017 02:57
I have made new test,
mounting the second shipment of QuaT on the original Dark Basic Professional version 1.0 (CD),
the result gives the same errors.

And another test, just installing version 1.0 (CD) and deleting files
TGCOnLine and mounting the TGCCertificate and TGCFree,
the result gives the same errors.
DB Pro

Attachments

Login to view attachments
John Y
Synergy Editor Developer
21
Years of Service
User Offline
Joined: 4th Sep 2002
Location: UK
Posted: 18th May 2017 11:09
If you have the very latest version of Synergy Editor I linked you to, then I think the config file is actually stored in C:\ProgramData\...
Synergy Editor - Available for free HERE!
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 18th May 2017 13:34
Using Synergy Editor (latest version), problem > do not create exe
DB Pro

Attachments

Login to view attachments
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 19th May 2017 17:41 Edited at: 19th May 2017 17:41
I've continued to do more tests with different file mounts,
I can not find any solution that works ... something bad has gotten into Dark Basic Professional ...

I give up ?
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 19th May 2017 18:19 Edited at: 10th Jun 2017 15:57
After more than a year with problems to create executable of my programs,
I see that there is a sequential process of errors that is repeated.

After two months of working fine, a first error arises
(Variable "MouX" does not exist in the program),
After this error will happen all kinds of errors and I do not see arrangement.
This has happened to me five times over a little over a year.

So I understand that the best I can get is that one of the assemblies will run for two months
in a row and after those two months it will fail,
so after two months of working, I will be three or four months with mistakes.

Combining files from different versions of Dark Basi Professional I do not see it working and I did a lot of testing ...

I think the least complicated thing would be to supply Key for the Dark Basic Professional bought and contained in CD.
That should work because it always worked.
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 19th May 2017 18:20 Edited at: 22nd May 2017 16:33
My version 1.0 of Dark Basic Professional does not even support editing and the released versions,
according to my thousands of tests done with all the versions that I have downloaded from the Game Guru page,
none of them works ...
Use EditorNew, it supports editing, but it does not create the executables in Win 7,
I do not know if other versions of Windows can work, that should say who has another OS installed and has done recent tests ...

Sorry, I speak for Me and I do not know what else I can do in this subject,
I did almost everything and there is no way to find a solution that will last in time,
currently I believe that the problems I had previously have been accentuated,
I could always edit dba With my version Dark Basic Professional 1.0 (CD),
is not currently possible, then that indicates that something is changing and affects the operation of the Editor and the Compiler,
something like a curse ...
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 19th May 2017 18:24 Edited at: 22nd May 2017 16:35
Thank you to all the friends and colleagues of this Forum.

I will continue to visit this forum, which has very trained and generous users.

DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 10th Jun 2017 16:29 Edited at: 11th Jun 2017 14:25
Dark Basic Professional version 1.0 (CD) does not work for lack of KEY,
the released versions downloaded from the Game Guru page,
in thousands of tests combining files, but they do not work,
it always ends in some kind of error ...
Currently, only EditorNew supports editing .dba files,
but it does not create the executables (at least on Win 7).
I do not know if other versions of Windows can work,
that should say who has another OS installed and has made recent tests ...

Sorry, I speak for myself, I do not know what else I can do on this topic, I can no longer create executables.
I did almost everything and there is no way to find a solution that lasts more than two months,
currently I can no longer create an executable that works.
I think the problems I had until recently have proliferated, and everything is wrong.

Previously, with the option to send the key, I always worked,
could edit, compile and run programs in DB Pro with my version of Dark Basic Professional 1.0 (CD),
Now this is no longer possible, now you have to combine different versions,
but something is changing and affects the operation of editors and compilers,
at first to combine, some combination worked, but these,
after a time (maximum two months) same mistakes.

Currently this is no longer achieved, currently all combinations end in error.
For more than six months I have not been able to create executable for my programs in DB Pro,
this means that I can keep updating my programs, so I see,
there is no solution, then I have to search for myself,
the only way out I happen to start everything with another language, such as C ++,
I miss a language converter, that would greatly facilitate the work.
DB Pro
zero32
7
Years of Service
User Offline
Joined: 28th Jul 2016
Location:
Posted: 12th Jun 2017 06:54
i uploaded my dbpro folder here: https://forum.thegamecreators.com/thread/219455#msg2603645
you can try that if you want.
Derek Darkly
12
Years of Service
User Offline
Joined: 22nd Sep 2011
Location: Whats Our Vector, Victor?
Posted: 14th Jun 2017 01:04
Have you considered going back to Windows XP (SP3)?... mine's still kicking ass.
Send your parents to noisy sprite demo hell... enter the D-Zone
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 14th Jun 2017 21:31 Edited at: 19th Jul 2017 00:53
I had installed Widows 10. For two months I had no problems, from that time was the first error "Variable MouX do not exist in promam",
after that my mouse went crazy, I had to buy another mouse, my stickmemory They failed to work,
the screen driver made a collapse error followed,
added to that blue screenshots of Windows error, I tried to save my information in CDs,
I did not respond, I finally uploaded all the information from my PC to OneDrive "the cloud" , And erased the hard disks.
After that I tried to install Windows 7 from the original DvD, but it was not possible to install it, since I could not find the hardware files.
I had to take my PC to a workshop, they got to install my Windows 7, I went to download my files from OneDrive,
but there were only empty folders, the files were gone.
Install my custom programs, including my DB Pro 1.0 (CD) version with the Key that was sent to me from Games Developer to my email.
Everything worked well, until after about two months, the error "Variable MouX do not exist in program" appeared,
after which I reinstalled my DB Pro, but
No longer sending the key to activate it.
It was then that I visited the Game Guru page and downloaded a released version,
mounting the folders and archives on the installation of my DB Pro 1.0 (CD) and worked for a period of two months,

from there other errors appeared, and I went to Do combinations of versions, rarely came to work a combination,
but soon after more errors arose and since then I stopped making more attempts since practically any combination I make now will not work.

When I installed Windows 7, when I asked for hardware files and they did not appear on my PC,
I tried to install Wiondows XP Professional from which I also have original DvD,
but it was not activated.

With Windows Vista the problem persists

If I can format the hard disks, how do I install Windows XP Pro, if the same thing happens to me that it is not activated from the CD driver?,
I know that the initial reading status must be changed from hard disk To CD and that I always do when I install an OS.

Thanks Derek

===================================================================================================================

I've been meditating on my problem with DB Pro, maybe there's a way to fix it;
I would reinstall my version 1.0 (DB) and delete everything that is installed in the folder
C: \ Program Files \ The Game Creators \ Dark Basic Professional \ ...
To install a version of DB Pro that is running in the same place.
But to do this test would have to receive the version that works from another user to the full as it has already installed.
If there is a friend who lends it to it and gets solved the problem, not only would I be graceful,
since I imagine many others should be going through similar problems with their DB Pro.
I do not know if doing that is legal or not, but if Lee Bamber does not offer Key, nor solution to these problems,
I do not see another way of being able to continue programming in DB Pro.

I think it would be less problematic if the "Games Creator" or Lee Bamber, continues to supply key.
All versions purchased from DB Pro have the same problem.
The release of the DB Pro language is to applaud and thank,
but ... what is the point of having released versions that end in error and worse still have CD versions and can not function for lack of key?

emilioanibal@hotmail.es

===================================================================================================================

The sooner for me to remove Windows 7 and install Windows XP,
it would have to be the 26th of June this year, since I have to keep in mind that, perhaps,
a problem arises when trying to install Windows XP and I get hung up with My PC and without OS installed and I move my heavy PC,
to a workshop, to get it installed and I continue to pay euros, when the problem is because of DB Pro, not the OS,
I say this because, in both Windows 10 and Windows 7 and Widows Vista, Windows XP I can not install it on my PC,
DB Pro errors are the same
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 19th Jul 2017 00:45 Edited at: 19th Jul 2017 01:53
DBPro Developer

Hello, a greeting for all friends.
I have been more than 8 months without being able to continue programming in Dark Basic Professional, I do not know what else to do,
I've done almost everything that I can think of and I followed the guidelines that were given me by colleagues in this Forum, but nothing it works.
I'm about to throw in the towel, because I do not know what to do to be able to continue in my pending programs to update and they have been left to do half ... A total disaster.
In short, I do not want to disturb you, but if God allows me to, maybe someone can help me get out of this crossroads that keeps me from programming.
For any programmer to appreciate what he does, it will be easy to understand.

The most I have achieved for more than 8 months, is to edit my dba codes, but I need to get them to be compiled,
without that I can not advance my programs in Dark Basic Professional.

From my total despair I greet you all again...

emilioanibal@Hotmail.es
DB Pro
zero32
7
Years of Service
User Offline
Joined: 28th Jul 2016
Location:
Posted: 19th Jul 2017 08:21
eamav wrote: "uploaded all the information from my PC to OneDrive "the cloud""

eamav wrote: "I went to download my files from OneDrive,
but there were only empty folders, the files were gone."


faulty hdd? a new hdd costs about 20€ up and a dvd drive costs about 10-20€.
are we talking about a normal pc or some special cases like a medion or a qompac or a dell? normaly the disc drive should be found, but if it is a special hardware then windows cannot communicate with it.
you can also install windows from an usb stick (google and youtube is your friend), but you must make sure that your pc will boot from the usb stick.

remember, there is no such thing as an easy fix for problems with windows. if you want this to work, you must keep going. *insert JUST DO IT videoclip here*

but i will make a video, where i install windows and dark basic pro from booting on the windows cd/usb to compiling a programm and then either it works and you can do it too, or it doesn't work and i finally can troubleshoot all those problems you guys have with windows 10 and DBPro.

which version(s) of windows do you have? (home edition, pro or even ultimate?) it would be the best if i use the same windows that you want to use.
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 19th Jul 2017 13:26 Edited at: 19th Jul 2017 16:17
Hello zero32, thanks for responding to help with my problem.
The OS I use now is Windows 7 Professional,
Is the one that works best for me.
If you get me to compile my codes I'll be grateful
Forever and in whatever way I can collaborate to return the help,
Here I will be willing in what I can help.
As for dd, I have an external dd of two disks with capacity for 3 TB,
but since the stage that I installed Windows 10, it is not activated.
The same thing happened to me Blu Ray (DVD) and my mouse became unstable.
I bought a normal DVD that I installed on my PC in a hardware workshop and I had to buy another keyboard and another mouse.
OneDrive I have left without information and uninstalled from my PC, it is a program disaster.
I hope to recover more lost information, when I have the money and the strength to take my PC to the hardware workshop
(I have a problem that makes it difficult for me to walk more than 80 meters in a row and I suffer from hyperthyroidism),
with some luck I might be able to recover the contained information On the external dd.
The nearest hardware workshop is 700 meters away.

To go to that area (for me, because of this physical problem is another problem to overcome,
I have to concentrate mentally and that requires a tremendous effort)

I recovered some files from my EIE program and the amount of images obtained with the different versions of it,
so I have something left over from what I lost.

The last executable version of my "EIEv17" project that I managed to compile in DBPro,
comes from May 4 - 2017, was modifying the "crop image" option and was left unfinished.
With this I made that image that I put in this Forum.
This image-editing program "EIE" comes from my first essay versions of December 7 - 2006

=============================================================================================

I add some lines on a divine theme, maybe you like it or maybe not.

=============================================================================================

With the passage of time, I reorganized the "EIE" distributory structure, allowing it to be extended indefinitely,
for each separate code section there is an appropriate place, already prepared in advance,
that allows me to continue programming my editor with ease.
To this day I do not use 3D in this program, who knows if later to get some more benefit by applying 3D commands,
but my program does not require it,
it is only an Image Editor with which you can create textures and images that do not exist In the market,
as many as almost infinite.
3D if I will use it to create a real image of God himself,
the image with which He showed me in August of 1993,
I keep all the details in my memory ...
To give the proper realism, I will have to do this other work in animation 3D mode.
I only have one problem to solve and that is related to the texture of the feathers,
since there is a geometric impossible too complicated.
In case of receipt, I tell you that during that visit of the Lord God,
for two minutes, I was bound by his divine hands, preventing me from falling to the ground,
I could not speak, just think and observe all the details I recorded in my memory.


His only words as I approached his ball of white light were these:
"TRANQUILO, NO PASA NADA"
(It is a phrase that was used a lot in my country in those dates.)

After this visit, I had to meditate on what happened for months,
it was after a famous creator-draftsman came to mind that he might also receive the sight of God at some point,
I say this because there is a relationship between the Hands of the comic books of Disney and the Hands of God,
may be a coincidence or that Walt also knew as I, how the hands of God are shown.
I am revealing an important detail about God, his hands have four fingers not five.
Some time ago I read a scientific comment in which it was said that our human hands would lose the little finger ...

Another famous one that I understand received the visit of God,
was Amenofis IV I (Akenaton), since he himself relates that the Sun appeared to him next to the sphinx,
exists a relive in which is shown a helmet or tiara of the That arise two hands with four fingers each,
that comes to be the same that I could contemplate in the visit that I had Grace to receive from the Most Great

I reveal another important fact:
The luminous and white radiation of the image of God,
Paralyzes our motorism, in such a way that
Only allows you to see and think.
As for the message of God, I must clarify that it is not transmitted
In the form of sound but the result of receiving it is the same.

The effect of communicating God directly is the same as if you heard,
it is after you rejoice the statement when you realize that your ears did not hear,
it is the mind that receives the divine message directly.


This revelation I leave here as a gift for all those who have helped me...

==========================================================

In these last days I was already unable to solve the Compilation problem.
So I asked God for help on this topic, now there is zero32 with an idea,
which makes me feel hopeful that I can continue programming in DBPro.
Thank you Lord God and thanks to you.

==========================================================



My PC is DELL XPS 420, with Intel Quo core (4 cores) 3Gh for each core.
Memory RAM 4 GB, video card NVIDIA 600 series (mod 650)
This PC includes two internal dd of 1.5 TB each.
If you need more information about my team,
you write to me and I'll look for that information and I'll give it to you.

Thanks my friend zero32, greeting

And thanks also to all the companions who in one way or another helped me.

==========================================================

emilioanibal@Hotmail.es
DB Pro

Attachments

Login to view attachments
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 8th Aug 2017 09:45 Edited at: 8th Aug 2017 09:46
If it is very difficult to get a DBPro installation that works without problems,
you have to go forget about this language because, if the compiler does not work,
you can not be creating programs in DBPro, this is a logical deduction,
since every program requires have an executable to activate it and get the code to run.
I am waiting for my friend Zero32, to see if he can solve this dilemma,
with a DBPro installation that can work at least on Windows 7 Professional,
on 32-bit System and that is my current PC Operating System.
If it is possible to resolve a DBPro installation that works,
perhaps it would be good to place links on this Forum page to download it,
with the instructions of the assembly in correlative order,
this would be appreciated by all Forum Users, not just me.
As long as I have encouragement,
I will continue to wait for the opportunity,
to continue with my "EIE" image design program and if it gives me time to do more,
even better.

Thank you and greetings to all of me.

EmilioAnibal@Hotmail.es
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 9th Aug 2017 08:36
If any User of this Forum, has a released version of DBPro that works completely and by necessity,
or for another reason you want to take advantage of it by charging a quantity of euros,
that you contact me through my email and we agree a particular negotiation,
this would benefit both.

EmilioAnibal@Hotmail.es
DB Pro
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 22nd Aug 2017 18:19 Edited at: 22nd Aug 2017 18:23
Hello everyone, I FINALLY GOT A FUNCTIONAL INSTALLATION!



I've got a combination of folders and files that works almost fine ...
I do not remember what versions I used for this installation.
In order for the DBro to be installed, I get it Installing the Dark Basic Professional
Version 1.09 of the original CD.
To this first instillation I added a released version of DBPro, plus the Install version.
Later to see that it did not work, I was removing folders and equivalent files
Repeated. I got EditNew to work, deleting the other editors and
All Launcher.
As for the Compiler, I had to remove all the Synergy Editor, and place the content
of the folder Compiler the fixed direction,
"C: \ Windows \ Compiler \ ..."
In this way the DBPCompiler if it works correctly.
To avoid conflicts, I have deleted all folders and files from DARK BASIC and DBPro stored as a backup to make these installations.
Attached is an image of the folder Compiler in which the folders and files of the
Of the Compiler used in this installation, if more information is needed to deduce
With more clardad what folders and files I have installed and that work, I have more images obtained, a 77 images.
Please note that the installation is under Windows 7 Professional.

THANK YOU LORD, this looks like a miracle ...
THANK YOU to all the companions who have helped me with your valuable ideas and information.

Emilioanibal@hotmail.es
DBPro
DB Pro
CumQuaT
AGK Master
13
Years of Service
User Offline
Joined: 28th Apr 2010
Location: Tasmania, Australia
Posted: 29th Aug 2017 10:13
Oh my goddddddd...

I've been following along with your struggle all this time and I'm so glad to see you finally worked it out, eamav! Congratulations!
Help out a fellow dev! Download and rate my games! They're free!

Wizzed Off! - (Android) (iOS)
God of Thunder - (Android) (iOS)
Extreme Lawn Mowing - (Android) (iOS)

And you can get Fluffy Knuckleduster merchandise at our new store!
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 9th Sep 2017 02:59 Edited at: 9th Sep 2017 03:07
Thanks friend, I am very excited to continue with my EIE Editor,
currently in the EIE17xc2b version.
But I have an ERROR UNDEFINIED which prevents you from creating the executable,
I've tried different ways to compile.
EditorNew showed twice error for missing quotes in my code,
I fixed those faults, but still with the ERROR problem UNDEFINIED and I can not tell me what is the new ERROR,
that does not let you compile.
I will have to check my code or repeat my last code changes starting from a version code earlier than the current one.
Aside from this problem, I consider EditorNew excellent. I understand that it must be very complicated for an Editor,
to find all errors in a DBPro code, but maybe new versions of EditorNew, are more profitable than the previous ones.
I will see if I locate the latest version of EditorNew and proceed to replace the one I have installed with a newer version, if there is one.

I usually spend things like this now, when I remove too much code with too many changes and rectifications,
but I usually do that sometimes, when I get a revolutionary idea ... hahaha ...



DBPro
emilioanibal@hotmail.es
DB Pro
Green Gandalf
VIP Member
19
Years of Service
User Offline
Joined: 3rd Jan 2005
Playing: Malevolence:Sword of Ahkranox, Skyrim, Civ6.
Posted: 9th Sep 2017 21:28
Where exactly is this message? Can you show us a screenshot? Is it the familiar "undefined parser" error? If so, then it usually means you haven't closed an earlier exe properly or possibly you have some files left over from an earlier incomplete compile and execute. Can you show us a screenshot of the contents of the Project folder? There might be a clue there.
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 29th Sep 2017 01:25 Edited at: 29th Sep 2017 16:15
Hello everyone:

Thank you Green Gandalf; in regards to the UNDEFINED Error, is resolved, updating the code and Compiling it again.

I have to ask an important question,
since in order to continue developing my Image editor (Current version "EIE19c"),
I have to solve the "Error ... FindLabel",
from that I have no idea what it is.
Long time ago when this error appeared I went to my code to look for problem quotes ("),
but this I think is not the problem now.
Insert the image that gives of that (ERROR UNDEFINIED...FindLabel (1) and (2) party)
If somebody help me in this, please,
I've been with this Error for four days and I do not find where the Error is in my current code,
I put REMSTART ... REMEND in almost all the code,
to facilitate the search of the Error,
but not so I have been lucky enough to find it.
I don not know what else Error, I can do ...

I'm using EditorNews


I can advance the fact that sometimes the problem that causes this Error,
comes from quotes in odd number, that for some lack, can not define.
One way to save the "ERROR UNDEFINIED ..." is to update the code by means of "Save" and "Save As",
but this works a while, until a day arrives, where it can not be solved in this way.
It is somewhat complicated and seems to be a bug of the Editor-Compiler,
it can also be that influences,
that long list of DBPro files repeated showing in number up to 53 different repetitions, such as Errors added ...

I thank you hall.


Programmer DBPro
emilioanibal@hotmail.es
DB Pro

Attachments

Login to view attachments
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 30th Sep 2017 03:01 Edited at: 30th Sep 2017 17:18
I try with a new small code named "Reader Character in file txt-02",
     which I created today, this executable, read and check if the contained quotes
      in an .text file, add PAR or ODD.
      I copy my EIE19c code in .txt format and give it the name "Detec.txt".
      I make a check of the contents of quotes, the result being PAR (that's good,
     but not sufficient, since, in the case of missing a closing quotation mark in pairs of lines
     code would also give PAR, but this implies pairs of errors.


============================================================================
============================================================================
============================================================================


New problems arise with the small code:
1º SAVE and SAVE AS (Does not update the source code ... sometimes)
2º Compile the file:

         A. Compile (Creates .EXE, but black screen when running)

         B. Compile & Run (Create the .EXE, but does not execute it, when directly executing the .exe,
                   black screen)

         C. Compile & Run in Debug Mode (Run correctly, DO NOT create the .EXE)

         D. Compile & Run in Step-Through Mode (Run Correctly, DO NOT create the .EXE)


============================================================================
============================================================================
============================================================================


Copy the new code here to check Pars or Odd quotes in .txt files, in case you need them ...:

REM ======================================================
REM ======================================================
REM
REM Dark Basic Pro Project
REM Created Friday, September 29, 2017
REM LECTOR-Caracter-para Archivos-Tipo .txt
REM Creating for Emilio Anibal Manuel Amyach Vicent "EAMAV"
REM emilioanibal@hotmail.es ... Valencia-España
REM
REM ======================================================
REM ======================================================
REM
SET TEXT FONT "VERDANA"
SET TEXT TO NORMAL
SET TEXT SIZE 16
m AS DOUBLE INTEGER
REM
REM ========================
REM ========================
REM
Arch$=""
Ext$=".TXT"
Ext1$=".txt"
REM
REM ========================
REM
FIND FIRST
REM ------------------------
REPEAT
REM
IF GET FILE TYPE()=0
Arch$=GET FILE NAME$()
IF RIGHT$(Arch$,4)=Ext$ OR RIGHT$(Arch$,4)=Ext1$
INK 0,0
BOX 5,5,500,34
REM ------------------
Tec=0
INK -1,0
TEXT 5,5,"Archivo -> "+Arch$+" ... Aceptar[y] ... Reusar[n]"
SLEEP 750
SYNC
REM ------------------
REPEAT
Tec=SCANCODE()
UNTIL Tec=21 OR Tec=49
REM ------------------
ENDIF
ELSE
FIND NEXT
ENDIF
UNTIL Tec=21 OR GET FILE TYPE()=-1
REM
REM ========================
INK 0,0
TEXT 5,5,"Archivo -> "+Arch$+" ... Aceptar[y] ... Reusar[n]"
REM ------------------------
INK -1,0
TEXT 5,35,"Archivo => "+Arch$+" ... Continuar[EXE]"
WAIT KEY
REM
REM ======================================================
REM ======================================================
REM
Car$=CHR$(34)
INK -1,0
TEXT 5,65,"Caracter Lectura -> "+Car$
REM ========================
IF FILE EXIST(Arch$)=1
OPEN TO READ 1,Arch$
ENDIF
REM ======================================================
REM ======================================================
D$=""
m=0
n=0
REM -------------------------
REPEAT
READ STRING 1,D$
m=m+1
IF D$=Car$ THEN n=n+1
IF n=2 THEN n=0
UNTIL D$=""
CLOSE FILE 1
REM -------------------------------------------------------
INK -1,0
TEXT 5,95,"TOTAL Comillas = "+STR$(m)
IF n=1 THEN TEXT 5,115,"¡ERROR!...IMPAR "
IF n=0 THEN TEXT 5,115,"!OK!...PAR "
INK RGB(50,250,50),0
TEXT 5,200,"Finaliza pulsando una tecla"
WAIT KEY
END
REM ======================================================
REM ======================================================



============================================================================
============================================================================
============================================================================
This code that I show here is not the first one I do to scan text,
but it is designed to go directly to a ".txt" file located in the same folder as the source code,
only the first file found in said folder and being this one with extension ".txt".

The function "Car $ = CHR $ (34)" carries the ASC2 code number of the quotes,
changing this number in this source code, will scan another character,
you do not want to do more to make it work.
The final result gives the total number of times the character searched for in the text, plus the result,
which can be: "ERROR! ... ODD" in case of being Odd, or; "! OK! ... PAR", in case of being Par.

This same source code can be expanded to facilitate scans for other more detailed functions,
such as determining the exact line position where a quotation mark is missing,
and the total number found up to that point or place in the text.
I think it is also possible to track loops, it is possible to determine if the loop structures are or are not correct,
or if a Loop start or end is missing and determine the position where a Start or a Loop End is missing or left over,
namely is possible with loops like "IF ... ENDIF", "IF ... THEN ...", "FOR ... TO ...", "NEXT ...", "REPEAT" - "UNTIL ... .", etc.
In Loops "IF ..." proceed to the sum of "IF" subtracting from this "the following" ENDIF "and" ... THEN ... "
giving zero result when there is correspondence,
or 1 or -1 when there is no correspondence.
With the other loops it is also possible to proceed in the same counting mode.


============================================================================
============================================================================
============================================================================

A greeting from me for all colleagues and friends in this forum.

============================================================================


Progranmer in DBPro

emilioaníbal@hotmail.es
DB Pro

Attachments

Login to view attachments
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 1st Oct 2017 01:49 Edited at: 22nd Apr 2019 20:38
I already found that is what causes the UNDEFINIED ERROR .. FindLabel
In previous situations with this same Error, I realized that
was caused by not matching the quotation marks enclosing the strings in DATA "..."
This time I checked with my other new program that the quotes were PAR,
so it was quite likely that the error was not because of quotes ODD.

Using another previous version of my conflicting program, I was adding parts
of the last version, replacing the parts of code of the previous one with those of the last one
version that is the one that gave that Error, this previous program still worked without Error
until I replaced the DATA part, which in the current contains 51 subroutines and in the previous 50,
each subroutine containing 6 lines of DATA characters in quotes and gave Error!

ONE OF THE SUBJECTS was missing, namely the number 44.
after adding this Subroutine, the program is again executable.



This is related to Editor bugs that do not correctly update the open source in editing.

================================================================================


Mr. LEE BAMBER:

Hello !

Take note of this as follows, for pleasse;
    It follows that, at least in my case, the ERROR UDEFINIED..FindLabel
    is related to the DATA Command and its contents.
    I think it is the EDITOR it self that causes this problem, for not updating the code
      source at the time and make it remain with parts that do not correspond to what
      writing of last.
   I can not prove this, but I've been looking at code for a long time.
      it is often the case that making new changes in it, happens later to a
      previous state, for no apparent reason.
        This happens now with EditorNew and earlier with my Dark BASIC
        Professional (the original one on CD version 1.0) more sharply. look at the
post I put in this forum and there you will see that not only fails to update the source code,
but it seems that SAVE and SAVE AS ... cause errors in the code for not correctly updating the code,
maybe this also has to see with the UNDEFINIED Error. FindLabel.
I hope I have contributed something that is useful.



¡¡ Yeahhhhhhhhhhhhhhhhh !!

================================================================================
================================================================================
================================================================================

For a year now I have been using the free versions of Darl Basic Pro, in addition to the NewEditor.
It works very well, but there must be some problem with updating the source code.
The complete package of the Compiler must be placed in the C: \ Windows \ Compiler \ , but files and folders disappear over time ...
The editor package must be installed in C: \ Program Files \ The Game Creators \ Dark Basic ProfessionAL \
The installation assembly of the DBpro, when compiling shows 53 file repetition errors ...
That is all.
Thanks to you I can continue with my EIE project, it is currently in version 36b.



I need to download the lates DBPro version, including the EditorNew,
but I can not find it in the forum, I do not remember where are the files to download from The Games Creators
Can someone give me information about it?


===============================================================================
===============================================================================
===============================================================================

Again I have the same problem as the one that made me open this post series.
Now it gives ERROR of "The variable Mx does not exist in the program",
if I get this answer changed, it will give me another similar ERROR;
"The tag does not exist".
I have not been able to resolve this ERROR for days
I understand that this ERROR is a way of not saying anything about the true error that I suppose must exist in my Source code,
but this time I have it very complicated and I do not think it solves it,
I have already tried it in several ways, but there is no way this obstacle is overcome.
  Please, if anyone knows anything about it, let me respond.
Another thing that I have pending is to download the latest version of the EditorNew or DBPCompilator,
or both ... I do not see in the TGC pages anything like that.

Greetings to all the colleagues of the forum

Programing in DBPro
emilioanibal@hotmail.es



--------------------------------------------------------------------------------------------------------------------------------------------------------------------
For 2 years I have not been able to enter this forum, today I have solved it and I am here again.
The intention is to greet all the comrades, especially all those who responded to my problems.
And again, thanks to everyone.
Enter this forum more time, with the idea of ​​learning more about the DBpro.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------


=======================================================================================
=======================================================================================
=======================================================================================
DB Pro
Mage
17
Years of Service
User Offline
Joined: 3rd Feb 2007
Location: Canada
Posted: 8th May 2020 03:40 Edited at: 8th May 2020 03:43
I would suggest using notepad.exe to search each DBA file you are compiling for this term. It's worth mentioning that the IDE (both normal and Synergy) have bugs that can mess with how text is displayed. It might be that you have this term in the DBA, and the IDE is glitching out and hiding the typo on you.

Secondly it is possible you have an error in your programming that is not being handled properly by the compiler or IDE. Normally when there is an error it should halt the program and provide the line number. There is a whole category or errors that can return the wrong line number, but separately an even more difficult category that returns no line number at all. It is also possible you have a syntax error and the program is compiling anyway when it should not.

So my advice here is you need to narrow down where the error is occurring in the program. Be mindful of what is activating when this occurs, and you might need to install monitoring or logging code to check the state of different sections of your program for when this error occurs.

A lot of times these deep and hard to track down errors occur from improper use of plugins. I expect you will eventually find a syntax error somewhere, or you're running out of arrays/memblocks/etc. and wonder why the program was even able to compile.

Mage's Modular Code - Get awesome UI controls and powerful Bitmap Fonts!
Screen Device Recovery - Stop your apps from crashing when minimized/tabbed/screen locked.
CPU Friendly Frame Limiter - Make your app generate less computer heat + noise, and use less battery life!
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 24th Jan 2021 16:41 Edited at: 24th Jan 2021 16:51
Hola compañeros;

tengo un problema con los actuales ejecutables de Dark Basic Profesional.
No funcionan en la nueva versión [Game Guru],
si funcionan en la versión anterior,
os adjunto imagen de las dos versiones .EXE
En la versión actual [Game Guru] surge un aviso que también os adjunto.
Llevo con este problema desde hace más de tres meses,
por favor, si alguien de vosotros puede dar una solución yo seré feliz.



Gracias a todos por las ayudas prestadas, que han sido muchas.

EAMAV
DB Pro

Attachments

Login to view attachments
Raven
19
Years of Service
User Offline
Joined: 23rd Mar 2005
Location: Hertfordshire, England
Posted: 25th Jan 2021 09:24
https://github.com/TheGameCreators/Dark-Basic-Pro/releases/download/12.02.16/Dark.Basic.Pro.Binary.120216.zip

Download > Extract to a memorable Folder

When you run the IDE for the first time., go to Tools > Options
Use the browse button next to the Compiler Filename, and search for where the Compiler is on your System

When you hit Apply / OK, it will then search all of the installed Plug-ins for Keywords and rebuild the keyword library.
And well, that's it... there is no need for keys as said security feature has been disabled in the Open Source Version.
It can be updated to u7.7 if you want / have said update files; but I'd be careful about random files from the internet, they're not necessarily going to be Virus / Malware Free; and TGC themselves no longer host the original patch files.

As for using DBP DirectX 9Ex / DirectX 11 "Updates"... I've personally had no luck with getting them to ever work, as they always throw up errors when building projects.
It could be that they're only compatible with the CD / DVD Version and not the Open Source Version; but then getting the CD / DVD Version to ACTUALLY install on Windows 7 / 8 / 10 without issues is almost impossible.
So I'd just recommend using the Open Source version instead.
eamav
7
Years of Service
User Offline
Joined: 8th Apr 2016
Location: Valencia - SPAIN
Posted: 7th Aug 2021 10:02 Edited at: 8th Aug 2021 10:08
Mi problema actual es el de que no consigo resolver el error que surge cuando intento crear el ejecutable para mi código EIE...
Al pinchar Compiler aparece el mensaje siguiente:
"Could not close nest at line 8378 "
se refiere a la línea siguiente del final de mi programa EIE...que es la línea 8377.
Esto significa que no voy a poder crear ejecutable con mi código terminado. Lo veo muy complicado de resolver.

Si alguien me puede ayudar en este problema que me escriba a mi correo Email o directamente en este chat.
Gracias de antemano por vuestra ayuda.
Desde esta página me dirigen siempre el mismo mensaje y ese no lo entiendo.

El mensaje que me llega es de Richard Warner.

Si hay alguien que sepa de una solución, por favor, que me escriba en este mismo chat o por correo Email:
emilioanibal@hotmail.es

Gracias amigos


Os quiere..

eamav
DB Pro

Login to post a reply

Server time is: 2024-03-29 13:36:43
Your offset time is: 2024-03-29 13:36:43