problem with matrix textures - GameCreators Forum

Author

Message

Mizipzor

20

Years of Service

User Offline

Joined: 24th May 2004

Location: Sweden

Posted: 6th Jun 2004 02:45

Link

Ok, im trying to read from "data" and make a matrix from it. Works fine. Then i added a floor texture but the matrix is only texturised (sp?) in the lower left corner.

Heres the code:

rem 1 will be added so its the same thing as 10
block=9

worldwidth = 20
worldheight = 20

rem make world, matrix
make matrix 1, worldwidth, worldheight, worldwidth/10, worldheight/10
position matrix 1, 0, -5, 0

load image "textures/ground.bmp",1
prepare matrix texture 1,1,1,1
fill matrix 1,0,1

update matrix 1

for mazey = 1 to worldheight
   for mazex = 1 to worldwidth
      read maze
      rem if a block was found
      if maze = 1
         inc block
         make object box block, 10, 10, 10
         color object block, rgb(40,15,85)
         position object block, mazex*10, groundheight, mazey*10
      endif
   next mazex
next mazey

data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1

+ Code Snippet

rem 1 will be added so its the same thing as 10
block=9

worldwidth = 20
worldheight = 20

rem make world, matrix
make matrix 1, worldwidth, worldheight, worldwidth/10, worldheight/10
position matrix 1, 0, -5, 0

load image "textures/ground.bmp",1
prepare matrix texture 1,1,1,1
fill matrix 1,0,1

update matrix 1

for mazey = 1 to worldheight
   for mazex = 1 to worldwidth
      read maze
      rem if a block was found
      if maze = 1
         inc block
         make object box block, 10, 10, 10
         color object block, rgb(40,15,85)
         position object block, mazex*10, groundheight, mazey*10
      endif
   next mazex
next mazey

data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1

Whats wrong? The full source is included... i have a movement problem also if you can figure that out

but i try to solve this matrix problem first.

Thanks in advance
Mizi

Dreaming of creating a highly advanced AI mind

Back to top

Profile PM Email

UberTuba

21

Years of Service

User Offline

Joined: 5th Oct 2002

Location: Brittania

Posted: 6th Jun 2004 03:11

Link

i dont think you should be using a m a matrix for that, a plain would do nicely.
also do not use fill matrix for a texture that will be repeated througought the matrix, as prepare matrix texture will fill it with that texture.
however as to why only noe corner is textured im stumped.

I'm Right and Reality is lying

Back to top

Profile PM Email

Mizipzor

20

Years of Service

User Offline

Joined: 24th May 2004

Location: Sweden

Posted: 6th Jun 2004 03:28

Link

as for now... ill wait with texturasation (sp?)... its easier to debug with a wireframe

thanks anyway

Dreaming of creating a highly advanced AI mind

Back to top

Profile PM Email

IanM

Retired Moderator

22

Years of Service

User Offline

Joined: 11th Sep 2002

Location: In my moon base

Posted: 6th Jun 2004 14:27

Link

Try this slightly changed code:

sync on
sync rate 0
autocam off

block=9

worldwidth = 20
worldheight = 20

rem make world, matrix
make matrix 1, worldwidth*10, worldheight*10, worldwidth, worldheight
position matrix 1, 0, -5, 0

load image "textures/ground.bmp",1
prepare matrix texture 1,1,1,1
fill matrix 1,0,1

update matrix 1

for mazey = 1 to worldheight
   for mazex = 1 to worldwidth
      read maze
      rem if a block was found
      if maze = 1
         inc block
         make object box block, 10, 10, 10
         color object block, rgb(40,15,85)
         position object block, mazex*10, groundheight, mazey*10
      endif
   next mazex
next mazey

repeat
   if upkey() then move camera 0.2
   if downkey() then move camera -0.2
   yrotate camera camera angle y() + mousemovex()
   xrotate camera camera angle x() + mousemovey()

sync
until spacekey()

wait key
end

data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1

+ Code Snippet

sync on
sync rate 0
autocam off

block=9

worldwidth = 20
worldheight = 20

rem make world, matrix
make matrix 1, worldwidth*10, worldheight*10, worldwidth, worldheight
position matrix 1, 0, -5, 0

load image "textures/ground.bmp",1
prepare matrix texture 1,1,1,1
fill matrix 1,0,1

update matrix 1

for mazey = 1 to worldheight
   for mazex = 1 to worldwidth
      read maze
      rem if a block was found
      if maze = 1
         inc block
         make object box block, 10, 10, 10
         color object block, rgb(40,15,85)
         position object block, mazex*10, groundheight, mazey*10
      endif
   next mazex
next mazey

repeat
   if upkey() then move camera 0.2
   if downkey() then move camera -0.2
   yrotate camera camera angle y() + mousemovex()
   xrotate camera camera angle x() + mousemovey()

   sync
until spacekey()

wait key
end

data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1
data 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1

The problem isn't with the texturing of the matrix - it's simply that you didn't make the scale of the matrix and the blocks the same

*** Coming soon - Network Plug-in - Check my site for info ***
For free Plug-ins, source and the Interface library for Visual C++ 6, .NET and now for Dev-C++ http://www.matrix1.demon.co.uk

Back to top

Profile PM Email Website

Mizipzor

20

Years of Service

User Offline

Joined: 24th May 2004

Location: Sweden

Posted: 6th Jun 2004 14:38

Link

thanks

Dreaming of creating a highly advanced AI mind

Back to top

Profile PM Email

Sorry your browser is not supported!

Newcomers DBPro Corner / problem with matrix textures