Sorry your browser is not supported!

You are using an outdated browser that does not support modern web technologies, in order to use this site please update to a new browser.

Browsers supported include Chrome, FireFox, Safari, Opera, Internet Explorer 10+ or Microsoft Edge.

FPSC Classic Models and Media / Huge canyon

Author
Message
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 30th Nov 2006 21:50 Edited at: 1st Dec 2006 04:12
Link
A little while ago I was testing large terrains in FPSC,I am now well aware of the issues involved with this,collision problems,enemies falling through etc.This particular terrain has no collision problems with the player however and I have a question ,would it work in multiplayer mode? Personaly I haven't gotten into mp yet and I was wondering if someone could try this out.If it worked it would open up a lot of possibilities.If not then it could maybe be used as a puzzle level,without enemies.
The canyon has caves and paths,to reach some of the upper levels would require placing of stairs and platforms.You also have to place a floor level.Some areas would require invisible walls.
As this model is huge and I mean huge you have to place it dead centre on the map,and at level 0.



Attachments

Login to view attachments
Back to top
Profile PM
butyouman
18
Years of Service
User Offline
Joined: 7th May 2006
Location:
Posted: 30th Nov 2006 21:53
Link
well that is cool and you have my downlaod but i think it will work in multi player

Slipknot Rules
Back to top
Profile PM Email
butyouman
18
Years of Service
User Offline
Joined: 7th May 2006
Location:
Posted: 30th Nov 2006 21:57
Link
here is a sugestion split it into parts it tooo big for mutli player and i just tryed it and it shoues up invisible

Slipknot Rules
Back to top
Profile PM Email
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 30th Nov 2006 22:00 Edited at: 30th Nov 2006 22:05
Link
@butyouman
As I said,you have to place the model dead centre and at level 0,if it hangs over the edge of the map it will not show up.The model will show if placed correctly as my screenshots show.Also place a player marker in the centre to ensure you are 'inside' the model.It'a little tricky,but achievable
Back to top
Profile PM
butyouman
18
Years of Service
User Offline
Joined: 7th May 2006
Location:
Posted: 30th Nov 2006 22:04
Link
yaa but its way to gib and if you wana start ur carecter at the side you can see were you were starting

Slipknot Rules
Back to top
Profile PM Email
Smitho
18
Years of Service
User Offline
Joined: 23rd Feb 2006
Location: Blackpool, England
Posted: 30th Nov 2006 22:08
Link
Mint!
Fantastic! What fps do you get with that, and how many polys is it?

Back to top
Profile PM
C_Coffie
17
Years of Service
User Offline
Joined: 31st Oct 2006
Location: CANDY LAND
Posted: 30th Nov 2006 22:13
Link
where did u get this from????????

Back to top
Profile PM Email Website
Candle_
18
Years of Service
User Offline
Joined: 29th May 2006
Location: kindergarten
Posted: 30th Nov 2006 22:13
Link
rolfy that is so cool. works like a charm and I could make a whole game with this.
Nice work on this.
Back to top
Profile PM Email Website
xplosys
18
Years of Service
User Offline
Joined: 5th Jan 2006
Playing: FPSC Multiplayer Games
Posted: 1st Dec 2006 00:27
Link
It works great once you get it setup correctly and it looks amazing. The cutouts and tunnels are custom made for walkways and bridges. This could be an entire level.

The forum provides a means to hide our true identity. Too bad we always screw up and let it be seen.

Back to top
Profile PM
Candle_
18
Years of Service
User Offline
Joined: 29th May 2006
Location: kindergarten
Posted: 1st Dec 2006 00:39 Edited at: 1st Dec 2006 00:40
Link
I'm making some walls to use for borders and they look great with it.
Looks like a fortress .
Back to top
Profile PM Email Website
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 1st Dec 2006 00:50 Edited at: 1st Dec 2006 00:51
Link
Quote: "The cutouts and tunnels are custom made for walkways and bridges. This could be an entire level."

Yeah,thats the intention,there's not much room for anything else.
11748 poly's,I got average 32fps.
Anyone tried this as multiplayer yet?
Back to top
Profile PM
Candle_
18
Years of Service
User Offline
Joined: 29th May 2006
Location: kindergarten
Posted: 1st Dec 2006 02:59
Link
Takes a little work to get things to work but they sure look cool when you get them too.

Attachments

Login to view attachments
Back to top
Profile PM Email Website
xplosys
18
Years of Service
User Offline
Joined: 5th Jan 2006
Playing: FPSC Multiplayer Games
Posted: 1st Dec 2006 03:10 Edited at: 1st Dec 2006 03:11
Link
I don't know about multiplayer, but I have problems with keeping enemies above ground right now. Still working on it.

Best.

BTW: I resized the canyon entity just a little smaller and it's much easier to get into the editor.

The forum provides a means to hide our true identity. Too bad we always screw up and let it be seen.

Back to top
Profile PM
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 1st Dec 2006 03:25 Edited at: 1st Dec 2006 03:27
Link
@Explosys,as I said you wont be able to use enemies on a terrain this size,I did try slicing it up,theres some discussion on the forums about keeping terrain size to 3x3 units to achieve this,but it became difficult to align the various parts.If you reduce the scale you may have problems with collision in tunnel sections,caught in tight spaces,head poking through ceilings etc.
If you zoom right out of the map it's not too hard to place.
Back to top
Profile PM
Zeppelin 37BDF
18
Years of Service
User Offline
Joined: 11th Jan 2006
Location:
Posted: 1st Dec 2006 03:42
Link
Wait, where did he post the download? I must have missed it, but I can't find it.



Back to top
Profile PM Email
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 1st Dec 2006 04:18 Edited at: 1st Dec 2006 04:32
Link
@Zeppelin 37BDF. Sorry about that I reposted the zip as an installer and for some reason it didn't go up.It's there now.
Back to top
Profile PM
RedneckRambo
17
Years of Service
User Offline
Joined: 19th Oct 2006
Location: Worst state in USA... California
Posted: 1st Dec 2006 05:53
Link
Rolfy- This thing is soooooooooooooooooo awesome. Holy talito fosheezo.

Just curious, what is the license to this, or did I miss that?

How on Earth did you make this?

I love butter
Back to top
Profile PM Email Website
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 1st Dec 2006 06:16 Edited at: 1st Dec 2006 06:20
Link
Its patch modeling,license reads when you install,do what you like with it.Except redistribution.
Back to top
Profile PM
Candle_
18
Years of Service
User Offline
Joined: 29th May 2006
Location: kindergarten
Posted: 1st Dec 2006 06:24
Link
What I did so far so they don't fall through the floor I added a floor to the level and then added the canyon. I can add entity to the main floor and he will just walk through the wall or part of the floor.
If you don't have to much light , it looks like he just walkout of a cave or some place.
If you want them up higher . just make a platform with stairs and put them on that.works pretty good
But you don't have to listen to me ...I'm crazy.. .
Back to top
Profile PM Email Website
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 1st Dec 2006 06:30
Link
Crazy..like a fox!
Back to top
Profile PM
RedneckRambo
17
Years of Service
User Offline
Joined: 19th Oct 2006
Location: Worst state in USA... California
Posted: 1st Dec 2006 06:45
Link
Patch modeling, what is that?

I wasn't paying much attention when I downloaded it, sorry bout that.

I love butter
Back to top
Profile PM Email Website
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 1st Dec 2006 06:55 Edited at: 1st Dec 2006 06:57
Link
Basically its spline cages.You could probably google some tutorials,its used primarily to create heads.
Back to top
Profile PM
Chris Franklin
19
Years of Service
User Offline
Joined: 2nd Aug 2005
Location: UK
Posted: 1st Dec 2006 10:59
Link
Hi,

Thanks for this awesome level , just curious can i use it for my darkbasic pro entry for nvidia? please

My nvidia compo entry
Back to top
Profile PM Website
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 1st Dec 2006 12:00
Link
Chris,this model was posted mainly for fpsc users to test,the competition rules do not allow FPSC users to exceed 15x15 grid units and this far exceeds that,placing them at an unfair advantage in this case.Sorry, but I would have to state that this model may not be used in this particular competition.
Back to top
Profile PM
Nickydude
Retired Moderator
17
Years of Service
User Offline
Joined: 4th Nov 2006
Location: Look outside...
Posted: 1st Dec 2006 18:55 Edited at: 1st Dec 2006 18:57
Link
That's just amazing! How on earth did you manage to get your head around that!! And how the hell do you line up walkways and such?


Back to top
Profile PM
tyrano man
17
Years of Service
User Offline
Joined: 26th Oct 2006
Location: Battle City - Kalspher :)
Posted: 1st Dec 2006 21:37 Edited at: 1st Dec 2006 21:39
Link
yer it is amazing!

I tried this a while ago to no sucsess..

The 512X512 map just isnt enough, plus i didn't know how to do all the walkways at once, cos it would need a very complicated map.

Really good work, I can see lots of possiblitys open up for exterior scenes real soon.

my rubbish attempt attached

(it was supposed to be sci-fi-ish, but i gave up)

gw:tyrano man-lvl 20 E/Mo
tyrano man kill-Lvl 8 W/Mo
rs:tyrano man 2-lvl 68

Attachments

Login to view attachments
Back to top
Profile PM Email Website
s4real
VIP Member
18
Years of Service
User Offline
Joined: 22nd Jul 2006
Location:
Posted: 1st Dec 2006 21:48
Link
Looking good but to build the levels better would be to have the caves as diffrent parts instead off one big thing.


Good work on this and it works well.

Im a wizz at texturing toilets
Back to top
Profile PM Email
Chris Franklin
19
Years of Service
User Offline
Joined: 2nd Aug 2005
Location: UK
Posted: 2nd Dec 2006 11:27 Edited at: 2nd Dec 2006 11:36
Link
Quote: "Chris,this model was posted mainly for fpsc users to test,the competition rules do not allow FPSC users to exceed 15x15 grid units and this far exceeds that,placing them at an unfair advantage in this case"


but fpsc and dbp are judged sperate o well thanks for the reply anyway saves me loading it in then not being able to use it.

Edit: Woah i'm using smilies far to much

also i take it i can't use the burned out car model the one thing that i'm really stuck with

My nvidia compo entry
Back to top
Profile PM Website
rolfy
18
Years of Service
User Offline
Joined: 23rd Jun 2006
Location:
Posted: 2nd Dec 2006 19:59
Link
Chris,the burned out car isn't an issue,use it if you want.
Back to top
Profile PM
Mobile C
17
Years of Service
User Offline
Joined: 2nd Dec 2006
Location:
Posted: 3rd Dec 2006 12:32
Link
Good work on this and it works well
Back to top
Profile PM
Back to top

Login to post a reply

Server time is: 2024-09-30 22:41:10
Your offset time is: 2024-09-30 22:41:10